nozzle fluid

W008-0000
In den Korb
  • Beschreibung
  • Mehr
  1. Nozzle with metal rotor and stator have to withstand extreme forces. The material used and the surface treatments performent should prolong the lifetime. The very high precision required for a quality rotary nozzle are constricting the suitable materials. The corrosion resistance is therefore second in line.

  2. To maintain this fragile design it is important to implement the right maintenance procedures. Use clean, filtered water to operate. Water should only come in contact with the nozzle when used. Water trapped inside the nozzle from use, but also from condensation caused by the changing air temperature, has to be removed. To have it dried is not enough as it can clock up and still cause galvanic corrosion. Do not use any oil. Oil may have additives and will dry out. A restarting might not be possible or only with a limited water film causing premature nozzle failure. If ceramic insert are used you can not use aggressive liquids. The ceramic is usually sealed in the housing with a sealant. Do not use mechanical forces to get a rotor turning. Marks from a screw driver on stator or rotor make a nozzle irreparable.


The fluid has to have the following characteristics:

-extreme creep-ability

-dispels water (water repellent)

-corrosion protection

-lubricant

-not aggressive to materials, sealants


With the emphasis on corrosion protection the nozzle fluid fulfills all the requirements.



Danger

Hazard-determining components of

labelling:

C11-14 Alkane White mineral oil, petroleum

Hazard statements

Causes serious eye irritation. May be fatal if

swallowed and enters airways. Harmful to

aquatic life with long lasting effects.

Precautionary statements.

If medical advice is needed, have product

container or label at hand. Keep out of reach

of children. Wear eye protection. IF

SWALLOWED: Immediately call a POISON

CENTER/ doctor. IF IN EYES: Rinse cautiously

with water for several minutes. Remove

contact lenses, if present and easy to do.

Continue rinsing. Do NOT induce vomiting. If

eye irritation persists: Get medical

advice/attention. Store locked up. Dispose of

contents/container in accordance with

local/regional/national/international

regulations. Repeated exposure may cause

skin dryness or cracking.

Description: Formulation of mineral oil with

additives in petroleum distillate

Hydrocarbons, C11-C14, n-alkanes, isoalkanes,

cyclics, < 2% aromatics Asp. Tox. 1, H304

25-<50%

White mineral oil, petroleum Asp. Tox. 1, H304

25-<50%

calcium bis(dinonylnaphthalenesulphonate)

Skin Irrit. 2, H315; Eye Irrit. 2, H319 1-<3%

oleoylsarcosine Eye Dam. 1, H318; Aquatic

Acute 1, H400; Acute Tox. 4, H332; Skin Irrit. 2,

H315 1-<3%

Butylated hydroxytoluene Aquatic Acute 1,

H400; Aquatic Chronic 1, H410 <1%

aliphatic hydrocarbons ≥30%